Wile · Cotton testing
Wile Cotton
Portable moisture meter for loose raw cotton. Requires a separately supplied 50 cm Wile 251 probe; the meter cannot measure moisture without it.

Quick decision
Is this method right for your task?
Consider it when
For rapid cotton checks during harvest and at processing facilities. Verify suitability for the cotton variety, sample density and accepted reference method before specifying the kit.
We clarify before quoting
Sample types, required parameters and ranges, tests per shift, reference method, sample preparation and data requirements.
Another method may be better when
You need different parameters, measurement ranges, throughput, automation or confirmation against another reference method.
Best suited for
For rapid cotton checks during harvest and at processing facilities. Verify suitability for the cotton variety, sample density and accepted reference method before specifying the kit.
Capabilities and controlled parameters
- The current product page states 7–30% and repeatability of ±2 percentage points. An older manual starts at 5.2%; use 7–30% for selection and confirm the specific instrument scale.
- Capacitance-based measurement, cotton-scale selection, automatic temperature compensation and averaging of repeated readings.
- Sample preparation and density affect the result. The manual provides density setting and adjustment against an oven reference method.
- Base kit: meter unit, carrying case and strap, 9 V battery and manual. The W251 probe is ordered separately.
- Do not assume suitability for compressed cotton fibre, grain or forage: a different matrix requires a separately confirmed method.
Before the first measurement
- Specify the crop or material, moisture range and measurement location.
- Agree regional scales, probes and kit contents. Cotton requires a W251 probe.
- Prepare a representative sample and follow the manual’s temperature conditions.
- Compare results with the accepted reference method and repeat measurements at several locations.
Official manuals and resources
All Wile manualsManufacturer documents are supplied in their original languages. Scales, firmware and older manual specifications may differ from the current supply. Kit contents and warranty terms are confirmed in the quotation.
Detailed specifications and manufacturer documentation.
Official Wile product pageWile
Go deeper
A selection of materials to understand the method, compare instruments and choose the right lab configuration.
LabLog
Implementation considerations
The final configuration depends on sample types, parameter ranges, throughput, accuracy requirements, and existing reference methods. Before proposing equipment, LabLog clarifies these factors and defines the supply scope, training, and method-verification plan.
How LabLog supports the project
- 01Capture requirements and compare suitable methods
- 02Configure the instrument, calibrations, and consumables
- 03Arrange official supply and commissioning
- 04Train operators in sample preparation and daily operation
- 05Provide service communication and repeat consumable supply



