Wile · Grain and seed moisture meters
Wile 200
Portable meter for grain moisture, test weight and temperature. Uses whole grains without grinding and returns a result in less than 7 seconds.

Quick decision
Is this method right for your task?
Consider it when
For dryers, grain stores and rapid lot checks requiring test weight and temperature as well as moisture. Agree the method and acceptance requirements with the receiving party for commercial intake.
We clarify before quoting
Sample types, required parameters and ranges, tests per shift, reference method, sample preparation and data requirements.
Another method may be better when
You need different parameters, measurement ranges, throughput, automation or confirmation against another reference method.
Best suited for
For dryers, grain stores and rapid lot checks requiring test weight and temperature as well as moisture. Agree the method and acceptance requirements with the receiving party for commercial intake.
Capabilities and controlled parameters
- Overall range 1–38%, depending on crop and region; typical cereals 5–30%, oilseeds 2–25%.
- Repeatability ±0.3 percentage points at normal storage moisture. Display resolution of 0.1 percentage points is not measurement accuracy.
- Patented built-in sample levelling mechanism; surplus grain collects in the surrounding tray. Sample preparation is not included in the stated 7 seconds.
- Temperature and weight compensation, result averaging, backlit display, automatic power-off and low-battery warning.
- Operating temperature 5–45 °C; powered by four AA batteries. USB is used to update grain scales.
- Kit: meter, case, strap, batteries, USB cable and instructions. Wile Connect requires compatible instrument hardware and firmware.
- Before harvest, compare readings with the receiving elevator’s oven reference method. Take several representative samples and average the results; apply an adjustment following the manual when needed.
- Crops and ranges depend on regional scales and instrument version. The Finnish crop list does not define the configuration supplied to Uzbekistan.
Before the first measurement
- Specify the crop or material, moisture range and measurement location.
- Agree regional scales, probes and kit contents. Cotton requires a W251 probe.
- Prepare a representative sample and follow the manual’s temperature conditions.
- Compare results with the accepted reference method and repeat measurements at several locations.
Official manuals and resources
All Wile manualsManufacturer documents are supplied in their original languages. Scales, firmware and older manual specifications may differ from the current supply. Kit contents and warranty terms are confirmed in the quotation.
Wile Connect: transferring results
Compatible versions of Wile 78, 200 and 500 use two QR codes: one to add the instrument and another on its display to transfer an individual result. This is one-way transfer, not Bluetooth synchronisation. Confirm QR support and firmware before ordering; the model name alone does not guarantee this function on older instruments.
Wile Connect manual — EN, PDFInstrument in use

Detailed specifications and manufacturer documentation.
Official Wile product pageWile
Go deeper
A selection of materials to understand the method, compare instruments and choose the right lab configuration.
LabLog
Implementation considerations
The final configuration depends on sample types, parameter ranges, throughput, accuracy requirements, and existing reference methods. Before proposing equipment, LabLog clarifies these factors and defines the supply scope, training, and method-verification plan.
How LabLog supports the project
- 01Capture requirements and compare suitable methods
- 02Configure the instrument, calibrations, and consumables
- 03Arrange official supply and commissioning
- 04Train operators in sample preparation and daily operation
- 05Provide service communication and repeat consumable supply





