Wile · Grain and seed moisture meters

Wile 65

Whole-grain and seed moisture meter with a multilingual text display. Supports the optional 95 cm Wile 651L temperature probe for measurements inside stored material.

Wile 65 — Grain and seed moisture meters

Quick decision

Is this method right for your task?

Consider it when

For field and storage checks where text guidance and an external temperature probe are useful. Wile 651L is a separate accessory, not a built-in probe.

We clarify before quoting

Sample types, required parameters and ranges, tests per shift, reference method, sample preparation and data requirements.

Another method may be better when

You need different parameters, measurement ranges, throughput, automation or confirmation against another reference method.

Best suited for

For field and storage checks where text guidance and an external temperature probe are useful. Wile 651L is a separate accessory, not a built-in probe.

Capabilities and controlled parameters

  • No grinding required; the manual specifies 16 crop scales, automatic temperature compensation and averaging of up to 99 results.
  • Manual ranges: grain and seeds 8–35%, oilseeds 5–25%. Repeatability is ±0.5 percentage points or better, not a guarantee of total accuracy under all conditions.
  • The text menu displays the crop. Each scale can be adjusted individually against a reference method.
  • With the Wile 651L probe, material temperature can be measured; the Wile 65 manual specifies 0–60 °C. Disconnect the external probe before measuring moisture.
  • Kit: meter, carrying case and strap, filling cup, 9 V battery and instructions. Additional probes are specified separately.
  • Before harvest, compare readings with the receiving elevator’s oven reference method. Take several representative samples and average the results; apply an adjustment following the manual when needed.
  • Crops and ranges depend on regional scales and instrument version. The Finnish crop list does not define the configuration supplied to Uzbekistan.

Before the first measurement

  1. Specify the crop or material, moisture range and measurement location.
  2. Agree regional scales, probes and kit contents. Cotton requires a W251 probe.
  3. Prepare a representative sample and follow the manual’s temperature conditions.
  4. Compare results with the accepted reference method and repeat measurements at several locations.
Laboratory testing of grain and feed

Official manuals and resources

All Wile manuals

Manufacturer documents are supplied in their original languages. Scales, firmware and older manual specifications may differ from the current supply. Kit contents and warranty terms are confirmed in the quotation.

Instrument in use

Wile 65 — Instrument in use
Manufacturer photos from Wile. Kit contents depend on the version.

Detailed specifications and manufacturer documentation.

Official Wile product page

Wile

Go deeper

A selection of materials to understand the method, compare instruments and choose the right lab configuration.

LabLog

Implementation considerations

The final configuration depends on sample types, parameter ranges, throughput, accuracy requirements, and existing reference methods. Before proposing equipment, LabLog clarifies these factors and defines the supply scope, training, and method-verification plan.

How LabLog supports the project

  • 01Capture requirements and compare suitable methods
  • 02Configure the instrument, calibrations, and consumables
  • 03Arrange official supply and commissioning
  • 04Train operators in sample preparation and daily operation
  • 05Provide service communication and repeat consumable supply

Request a product consultation

Cookies and analytics

GA4 receives a cookieless, non-personalized signal. Yandex Metrica and analytics storage need your consent.

Privacy policy